Evo over at Port Imperiale very kindly donated an Aenur for my attention. If you're not familiar with the figure, this is what Aenur looks like unaltered:
My initial reaction was to do something Eldar-y, but then I decided I wanted to try and push things a little further from the original figure. After some thinking, I put together a little visual mock-up of what I wanted to try and do, in the form of an Adeptus Mechanicus tech priest:
I was aiming to evoke a couple of classic Adeptus Mechanicus references; firstly the bare-footed Tech Priest Schlan from the Rogue Trader Adventurers range:
Secondly, the creepy tattered and cable-festooned vision of John Blanche's illustration from the Rogue Trader rulebook:
The basic plan was to remove Aenur's sword arm, legs and body. His legs would be replaced with those of an old Warhammer Vampire Counts ghoul, while his arm would get a bionic replacement. Unfortunately I didn't take any WIP or unpainted pics, but suffice it to say, removing the legs and arm was a bit of a hassle, involving clippers, modelling knife and lots of swearing! I attempted to make the cloak more tattered by gouging out some tears with a modelling knife and clippers. I also made an error of scale judgement, and the Mechanicus power axe I bought for Aenur was HUGE, so that got abandoned in favour of a Skitarii rifle.
After all the chopping, it was a case of assembling and concealing the joins with greenstuff. I extended the hood, as well as adding a face mask and some small tubes. He received a new backpack complete with mechadendrites as a slightly more modern addition to the Tech Priest look.
Finally, the painting was kept to a very limited Blanchian palette - a deep red, a dirty yellow and some classic black and white checks!
The yellow loincloth attempts to evoke the labcoat of the tech priest in John Blanche's illustration above. |
I think I can confirm I really don't like doing checks! |
Every good Tech Priest needs some mechadendrites to help with day-to-day tasks. |
I suspect Tech Priest Ay-Nor will see some action as part of an Inquisimunda warband at some point in the future. I'm tempted to build a Mechanicus retinue around him perhaps.
Tech Priest Ay-Nor instructs his menials in the day's tasks. |
Overall I'm satisfied with the results. The resulting figure is pretty close to what I originally planned, and suitably far enough away from Aenur. What do you think?
Elven Hired Sword Aenur > Tech Priest Ay-Nor |
Here are some of the other Aenur alterations already shared:
Tau Fireblade by Adam Devitt |
Alien Hunter by Miguel M. de Sousa |
Wasteland Aenur by Ewal Clam |
Wow! I've never thought that miniature could be so customizable.
ReplyDeleteIt's amazing what difference just a new head or weapon makes, even though the cloak is so distinctive :)
DeleteThat competition is already going beyond my expectations and there are plenty of entries to come still. You did a splendid repurposing here, just keeping the essential to transport it into a totally different place.
ReplyDeleteThanks JB. It was a trial, but I think the outcome was worth the effort :)
DeleteI can't wait to see the other entries.
This is incredibly cool. I had thought of trying some stuff on that mini, but never had thought of the stuff you made here. Awesome!
ReplyDeleteThanks for sharing your view and those others, truly inspirational.
Thanks Suber. I just wanted to try and get as far away from the original as possible. Grimy machine-man seemed about as far from a clean and sleek elf as I could make it!
DeleteGreat conversion! I would have never thought about doing that (Eldar legs and a power sword, sure, but not this!)
ReplyDeleteThe colors are well done, although it seems like the cloak needs a heavy wash of brown or something to really give it that Blanche look...
It's another benefit of working to someone else's challenge - you end up trying stuff you wouldn't necessarily have thought of.
DeleteThe cloak could possibly benefit from another wash, especially where it could pick up dirt. I'm pretty happy to leave him as is though.
Amazing transformation. Great job!
ReplyDeleteThanks Ana! Glad you like the results :)
DeleteSorry to post it here but I couldn't think of any other way to contact you.
DeleteYou posted a pic at
http://forum.oldhammer.org.uk/viewtopic.php?f=7&t=1643
showing some JUDGE DREDD minis. Do you still have the perp with the rifle-type gun, far left in the photo?
Ian
iamsmilie23-AT-aol.com
PM on the forum might have worked :) Unfortunately that figure went ages ago Ian - sorry.
DeleteOK :-( thanks for getting back to me tho
DeleteReally nice Jon, the finished product is immediately suggestive of the influences that you cited.
ReplyDeleteMy upcoming Aenur is a less involved conversion, but sufficiently different in concept to have essentially no overlap with yours or those others shown. I hope that it turns out even nearly as nice as this one.
Thanks Paul! Looking forward to seeing your version. I suspect it will be rather tasty :)
DeleteNice detailed work on the metal parts. I have always struggled with metal cause I generally don't like painting metal.
ReplyDeleteTBH, metal isn't my favourite either...hence why I try not to use it too much!
DeleteThose are some absolutely mind blowing transformations. I've also had the luxury of painting this model and loved it. Cool to see it transformed nearly unrecognizable.
ReplyDeleteSome incredible work from the participants. It's fun to try something really outside of your normal thought processes.
Delete